Pro Panels

Display Panels for Professional Artists

9017 Diplomacy Row Dallas, Tx 75247
toll free : 800 525 4159 / voice : 214 350 5765
fax : 214 350 7372 / email : questions@propanels.com

Supports

There are two types of bars that you can add to the top of your panels to give them extra strength. Each type comes in long and short to give you variety with your booth setup:

Support Bar
From $20

A telescoping bar used at the top of your panels for stabilization. They are best used in a corner to make the hypotenuse of a right angle triangle. They have a tube on the end that slips around the short leg at the top of the panel. It leaves that leg open so you can still use swing arm lights.

Banner Bar
From $30

A telescoping bar used at the top of your panels. These bars are used primarily with track lighting, to prevent tall customers from hitting their heads, or for extra clearance. They differ from the support bars in that they rise 8" before they span across the booth giving you extra height. They use a coupler to connect to the top of the panel leaving the top open for swing arm lights.

Canopy Hook
$15

We have had many requests for a method to attach Pro Panels to framework of a canopy. We are proud to announce our new Canopy Hook. This is an easy to use, very secure hook that slides into the top of any Pro Panel. The hook is adjustable and will reach up to 12" from the top of your panels and will fit over the framework of most canopies in the market. Just slide the hook into the top leg of the panel, adjust the hook height to fit the frame of your canopy and tighten the knob to secure. For best results use in conjuntion with our support bars.

Stiffeners

There are three types of stiffeners that can be used to reinforce your panels:

Standard Stiffener
$8

This piece of U channel metal has an opening in the middle for legs to pass through and help keep 2 panels in a straight line. They are about 9" long and powder coated silver vein.

T-Stiffener
$15

The T stiffener is useful when you want a panel to come out at a right angle from a side wall, or when you want to make a freestanding T in your booth.

L-Stiffener
$15

L Stiffeners are designed to help support right angle corners in your booth. However, support bars offer more strength.