| If shelves for light to medium weight items are desired, we can weld a shelving component called a slot standard into your frames. The slot standard is placed in either the upper, lower, or both sections of the frame. They are placed vertically and six inches from each edge. They add two or four pounds to the panel weight.
Each shelf is made from half inch birch plywood, covered
with carpet and comes with two shelf brackets. Shelves are
either 8, 10, or 12 inches deep by the width of the panel.
Many people use wood, glass, plastic or plexiglass shelves
of their own. More than one shelf may be put on a slot standard
section .
The slot standard is welded into the frame and hidden behind
the carpet so it is necessary to slit the carpet where a shelf
is needed. A 4" slit is required and should be unnoticeable
when the shelf is not used. We can slit the carpet for you
if you provide a measurement from the floor to the desired
height of the shelf.
|
